Professional systems for the United States & Canada
ban@grouprsh.com
Complete C7/C9 Christmas lighting solutions for professional installers, wholesalers, distributors, and lighting brands, with compatible LED bulbs, socket lines, wire, plugs, clips, and installation accessories.
Explore compatible C7/C9 LED bulbs, mini lights, commercial light line, replacement sockets, quick-connect plugs, and mounting clips for professional installations, wholesale supply, and private-label lighting programs.
Commercial LED bulbs available in multiple colors, lens styles, and C7/C9 configurations for holiday lighting systems.
Replaceable bulbs for commercial C7/C9 systemsView product details
Compact LED mini lights for trees, wreaths, garlands, columns, and detailed holiday displays.
For commercial décor and seasonal installationsView product details
Bulk socket wire for building custom C7/C9 light runs with project-specific spacing and lengths.
Bulk light line for installers, distributors, and projectsView product details
Replacement sockets for repairing or configuring commercial C7/C9 light lines and custom lighting systems.
Service and replacement parts for C7/C9 systemsView product details
Male and female quick-connect plugs for creating custom power connections on commercial Christmas light lines.
Fast field connections for custom light runsView product details
Universal mounting clips for installing C7/C9 bulbs on gutters, shingles, rooflines, and other exterior surfaces.
Roofline mounting accessory for C7/C9 bulbsView product detailsC7 and C9 systems suit residential rooflines, hospitality properties, retail façades, municipal displays, seasonal programs, and installer portfolios that require a familiar, replaceable bulb format. Each project is configured around the building—not sold as a one-size-fits-all consumer string.
Lengths and components are calculated from the site survey, not from a generic package size.
Measure every illuminated edge as a separate run, then add the vertical drops, transitions, service loops, and a practical installation allowance. We turn the elevation measurements into a run-by-run bill of materials instead of estimating from floor area.
Wire quantity includes socket line plus unlit lead wire, jumpers between roof sections, controller or timer leads, and return paths. The final length depends on outlet locations, roof geometry, wire routing, and the number of independently controlled zones.
All-in-one clips are useful for many gutter and shingle edges. Tile, metal, parapet, ridge, masonry, and specialty trim may require a different clip or fastening method. Confirm the mounting surface before the installation package is released.
C7 offers a smaller traditional profile; C9 produces a larger, more prominent roofline. Bulb finish, color, output, socket spacing, and wire color are selected together to create the intended appearance and daytime visibility.
Use each component for its intended role in the approved project layout.
Use compatible male or female quick-connect plugs when a measured SPT lead, branch, or endpoint needs a field-installed connection. Match the plug to the wire type and polarity, keep connections within the approved electrical plan, and protect outdoor connections as required for the site.
Use compatible lamp sockets when building custom-spaced light line or replacing a damaged socket. The socket must match the selected C7 or C9 bulb base, wire specification, spacing plan, and installation environment; replacement parts should be standardized for future service.
Record every roofline, peak, return, transition, power location, mounting surface, and access limitation. Separate illuminated runs from unlit leads and jumpers.
Select C7 or C9 bulbs, socket spacing, wire color, clips, plugs, control method, zone layout, service stock, and project packaging as one compatible specification.
Install the approved clip for each surface, keep bulbs consistently oriented, avoid pinching the wire, and leave planned service access at transitions and connections.
Test each run before final handoff, label the zones, document connection points, and retain compatible bulbs, sockets, clips, and plugs for future service.
Outdoor electrical connections, load limits, circuits, and fastening methods must be confirmed for the selected components, property conditions, and applicable local requirements.
Start with a site survey and run-by-run measurements. Select the bulb size, socket spacing, wire color, clips, plugs, controls, and service parts as one system. Install the approved clip for each mounting surface, keep bulb alignment consistent, test every run, label the zones, and document connection points for future maintenance.
Measure every illuminated roof edge, peak, return, window, column, or landscape section separately. Add transitions and a practical installation allowance. The final light-line quantity should come from the elevation plan rather than the building floor area or a generic kit size.
All-in-one clips work for many gutter and shingle edges, while tile, metal, parapet, ridge, masonry, and specialty trim may need different mounting hardware. The clip must match both the bulb orientation and the actual surface, so confirm site conditions before ordering the project package.
Calculate the illuminated socket line plus unlit lead wire, jumpers between roof sections, vertical drops, controller or timer leads, return paths, and service loops. Outlet locations, roof geometry, zone count, load limits, and approved routing determine the final total.
Use compatible quick-connect plugs when a measured SPT lead, branch, or endpoint requires a field-installed male or female connection. Match the plug to the wire specification and polarity, follow the approved electrical plan, and protect outdoor connections as required for the property.
Use compatible lamp sockets when producing custom-spaced light line or replacing a damaged socket. The socket must match the selected C7 or C9 bulb base, wire type, spacing, and installation environment. Standardize replacement sockets and bulbs so future service remains simple.
Often, yes. We can help standardize bulbs, socket line, wire color, spacing, clips, connection parts, controls, job packaging, and replacement stock around the installer's recurring project requirements.
Share elevations, measurements, mounting surfaces, power locations, preferred bulb style, spacing, and project quantity. We will help configure the complete C7/C9 system.
